Is your most favorite PS4 suddenly making some annoying beeping sounds which is irritating you?
Well there is nothing to worry about because, You’re not alone! To this issue many users have reported it and they get the problem solved from here.
Sometimes it is also possible that the beep sound is because PS4 wants to eject the disc and also has different issues.
And now it’s your turn to free yourself from this annoying sound. In this guide, I’ll clear up the reasons behind those beeps and also provide solution to fix this beeping issue.
Why PS4 Keeps Beeping
Firstly you have to know why this is happening to your play station 4 console. There can be multiple reasons behind it and they are listed below.
Outdated Firmware
So to have the latest firmware is mentioned by the playstation, make sure you have the latest one otherwise this can be a big reason behind the sound.
System Error
This can happen if there is a software bug or if the console has trouble reading game discs or connecting to the internet. When a system fault occurs on a PS4 console, it frequently produces a sequence of beeping sounds to indicate the problem.
Physical Hardware Damage
Some hardware issues, such as loose wires or defective components, bad power supplies and broken power buttons, can cause beeping to serve as an alert. Investigating the source of the beeps can assist in determining the exact problem.
Software Issue
When a PS4 doesn’t work due to software issues, it’s usually due to an incomplete system update, corrupt files, or even a bad hard drive.
Fix PS4 Keeps Beeping Issue
Now it’s time to look at the solutions to the beeping issue of your PlayStation 4 console.
Follow the steps mentioned below to fix the issue.
Power Cycle Your PS4
Power cycling may sound like an advanced term, but it’s a simple and practical answer to your PS4’s annoying beeping problems.
By performing these easy instructions, you can quickly recover your console, which can help with a variety of issues, including the annoying beeping.
- Turn off the PS4 console by power button, it seems like the console is already off then also you need to turn it off.
- Unplug the cable from PS4 at least for 30-40 seconds.
- Again press the power button while the cable is disconnected.
- Now connect the cable and see if it is turned on or not.
Most of the users get the beeping sound off after this method, however in some cases, if you are not getting the solution then there is nothing to worry about. Follow the below methods to solve the problem.
Clean Eject Button Touch Sensor
If the above method is not helping you then try this method. In this section, I’ll tell you how to clear the dust off the PS4 and tape over the sensor. The steps are as follows
Firstly clean the eject area from outside without opening the console. Sometimes from the outside dust can accumulate the eject button area.
You will need compressed air, soft cloth, and a brush.
- Take the compressed air and below some amount of air in the area where your eject button is located.(you can use walmart air compressor)
- After this take some soft cloth and clean the console area as much as you can.
- Apply a soft brush where a button is present and has a hole where dust can collect.
- Clean the rest area with the help of air.
Now secondly clean it from inside.
- So just flip it around (button side) and then at the back you will see the three screws.
- Take the 89 security screwdriver or else take a simple screwdriver which helps you to open the screws.
- Recommended screwdriver is a 2 millimetre flat-head screwdriver. Open the screw with caution because if you make any mistake it will break the PS4 and also void your warranty.
- Remove the cover and you will see the sensor which is green in colour and has a golden small plate on it.
- When you touch this with some metal object then it will eject PS4 disc.
- Take soft cloth and clean it carefully.
- You can also pass some amount of air on it, don’t you use any spray or liquid spray.
- Now after cleaning plug the console and touch with your finger on that golden part and you will hear the noise. So it mean the driver is working.
- After this take the pieces of tape and cover it on the golden part.
Note: If your gadget is still under warranty, please do not do this and instead send it to Sony for repair.
Clean PS4 Vents
Remove anything that is blocking the PS4’s air vents. Dust can collect in vents, so clean any vents on the outside and carefully vacuum dust from heat sinks and vents inside the PS4.
Dust can Accumulate in the vents of the PS4 console which will refer to blockage of air and due to this the overheating problem will occur.
Overheating PS4 may begin to make a beeping noise as a warning signal or because dust can increase fan activity.
Note: Also check our guide about how to clean the PS5 easily at home.
To clean the PS4 air vents follow the below listed steps.
Here materials which are needed to clean are: Brush, Compressed air, soft cloth.
- Take the brush and apply it on the side area of PS4 which is called vents.
- You can also take help from compressed air and clean the vents.
- Open the panel of PS4 and clean the vents from inside by using some soft cloth or soft brush.
Update PS4 Software
There are two methods to update the PS4 software i.e Automatic and manually.
First Update It Automatically
- Login to your PS4
- Go down where options are available and select the settings option from there.
- From the Controller select the setting and click on the X button in the controller.
- After this on the screen will get the option, simply go down and look for the option “Power Saving Settings” and click on it.
- After this select “Set Features Available in Rest Mode”.
- You will be able to see options from there check two options one by one i.e Stay Connected to the Internet and Enable Turning On PS4 from Network.
- Both of these capabilities must be enabled in order for the console to download and install updates when not in use.
- Now go back again to the settings option and look for the “System” option, and select “Automatic Downloads.”
- From these selectSystem Software Update Files.
Update Manually
If an update does not install properly, or if you choose to prevent automatic downloads, you can update your PS4 manually instead.
- Login to PS4 and go down
- Select Settings among listed options.
- Then go to the System Software Update.
- Install any updates that are available by click next.
- After installation you will get a license agreement, accept it.
- The update will be installed now.
- Check to see if your PS4 still ejects discs after installing the update.
Prevent Beeping Issues In Future
- Keep in mind that do not keep the PS4 on near the floor because the air vents can suck the dust from the floor.
- Clean the PS4 from time to time to maintain the functionality.
- Checking the power supply, cleaning the vents and fans to minimize overheating, and contacting Sony are all precautions for PlayStations that keep beeping.
Conclusion
Struggling with a beeping PS4 can be irritating, but by recognizing the potential reasons and implementing the necessary solutions, you can repair the problem and continue enjoying your gaming experience.
The most common causes of beeping are obsolete firmware, actual hardware damage, and software problems.
You may properly troubleshoot and address the beeping issue with your PS4 by following these procedures and precautions.
Allowing you to return to your gaming adventures without the annoyance of continual beeping sounds.
