Free sync will prevent you from screen tearing for a better gaming experience. And it also decreases the input lag for a faster response time in games.
So if you are finding the solution for FreeSync Brightness Flickering and not get the right solution?
Then You are not alone, most of the users reported about FreeSync brightness flickering and so there is nothing to worry about.
Causes Of FreeSync Brightness Flickering
The causes of FreeSync brightness flickering can be different, but some common factors include the following:
1. Backlight Of Monitor
The interaction between the monitor’s backlight and the dynamic changes in the FreeSync technology can lead to brightness flickering in some instances.
The backlight of a monitor is not directly related to FreeSync brightness flickering
2. Graphic Card Driver
However, outdated or incompatible drivers can lead to issues, including brightness flickering.
3. Low Framerate Compensation
If FPS is lower than a monitor’s maximum refresh rate then, LFC will increase your framerate even if it will get low to the monitor’s refresh rate to stop tearing and stuttering. This can cause brightness flickering.
You can check your monitor refresh rate using online tool like refresh rate test.
4. Frequent FPS Fluctuation
The FPS decreases to 47 FPS and your gaming monitor has a changeable refresh rate range of 48-144Hz, LFC will constantly be on and off and this can be one of the causes of brightness flickering.
5. High Refresh Rate Display
It’s important to note that certain factors related to high refresh rate displays can indirectly contribute to brightness flickering when using FreeSync.
How To Fix FreeSync Brightness Flickering Issues?
To fix FreeSync brightness flickering issues, you can try the following solutions:
1. Update Your Graphics Card Drivers
Updating your graphics card drivers can help you fix this problem.
Update AMD Graphics Card Drivers
- Navigate to the official website of the manufacturer of your graphics card. Ex. AMD
- Look for the “Drivers” section and Select your graphics card model
- From there Download the latest available drivers for your graphics card.
- Once the driver file is downloaded, run the installer and follow the on-screen instructions to install the new drivers.
Update NVIDIA Graphics Card Drivers
- Navigate to the official website of the manufacturer of your graphics card. Ex. NVIDIA
- Select the “Drivers” section and fill information accurately.
- From there Download the latest available drivers for your graphics card.
- Once the driver file is downloaded, run the installer and follow the on-screen instructions to install the new drivers.
2. Adjust Freesync Settings
To fix FreeSync brightness flickering issues, you can adjust the FreeSync settings on your monitor. Here’s how you can do it:
- If you don’t have Radeon Settings installed, you can download it from the AMD website. When you right-click on your desktop, select “AMD Radeon Settings” from the context menu.
- In the Radeon Settings window, click on the “Display” tab at the top.
- Adjust FreeSync settings and “Apply” changes.
3. Disable “Radeon Enhanced Sync”
You can also try disabling the “Radeon Enhanced Sync” feature in the AMD Radeon settings.
- When you right-click on your desktop, select “AMD Radeon Settings” from the context menu.
- In the Radeon settings window, click on the “Gaming” tab located at the top of the screen.
- Under the “Gaming” tab, select “Global Settings”.
- Scroll down and find the “Radeon Enhanced Sync” option, Toggle the switch to disable it. And save
4. Enable Or Disable V-sync
Follow the following step to enable or disable V-sync on both Nvidia and AMD graphic cards.
Enable or disable V-sync in Nvidia:
- From the start menu, select Nvidia Control Panel. If you don’t have an NVIDIA control panel then install it on your computer.
- Select the “Manage 3d setting” option.
- Under the global setting option select the Vertical Sync option and enable it.
- And if you want to disable then disable it from there.
Enable or disable V-sync in AMD:
- Open the AMD Radeon settings app on your system. If you don’t have this app, you can install it from the AMD website.
- Click on the global settings option.
- Under the global setting option, search for the ‘Wait for Vertical Refresh’ option and click on that small arrow that is shown.
- Under the ‘Wait for Vertical Refresh’ option you will get the enable option.
- If it was enabled then disable it. If you want to perform a disable function.
5. Try A Different Display Cable
To fix FreeSync brightness flickering issues, you can try using a different display cable.
- Identify your current display cable.
- Acquire a different display cable of the type that is compatible with both your graphics card and monitor.
- Disconnect the current cable after turning off your computer.
- Connect the different display cables.
6. Flicker Filter Method
When the backlight hits the glass it reflects towards the screen and causes the brightness to flicker. At that time the flicker filter will detect the light and send some signal to the monitor to reduce the brightness, thus the screen will not flicker much.
You can purchase a flicker filter that will reduce the flickering on your screen. You will get this at $15.
7. Using AMD Card
To fix FreeSync brightness flickering issues specifically with an AMD graphics card, you can try the following steps:
- Visit the official AMD website or use the AMD Radeon Settings software to check for driver updates and install them if available.
8. Using NVIDIA Card
To fix FreeSync brightness flickering issues with an NVIDIA graphics card, you can try the following steps:
- Visit the official NVIDIA website to check for driver updates and install them if available.
- To access the NVIDIA Control Panel, right-click on your desktop and choose “NVIDIA Control Panel.” Take the following steps.
- Under the “Display” category, click on “Set up G-SYNC” in the left panel.
- Make sure that G-SYNC is enabled for your specific monitor.
9. Reduced Refresh Rate Method
A. Change It Manually
- In the AMD setting, right-click on the empty area and select Display Settings.
- You will see the display adapter property on the screen, Select it.
- Select monitor information under this select graphics and from graphics select Advanced View.
- Now change the Monitor Refresh Rate to 90HZ and save changes.
B. Using A Third-Party Program
You can use software like CRU (Custom Resolution Utility). CRU allows you to create custom refresh rate profiles for your monitor. Here’s how you can do it:
- Visit the official website of CRU and download the latest version compatible with your operating system.
- Launch the CRU application after installation.
- Under the detail resolution Click on the “Add” button to create a new resolution.
- Under the timing option select the LCD standard.
- After this under the frequency section, set the refresh rate above to your monitor’s standard.
- For example, if your monitor is 60hz then you have to set the new refresh rate to 65 HZ which means you need to increase it by 5.
- Save the changes.
- After this restart your pc. Now you have to set the refresh rate on your windows to do this,
- Search for the display setting in the search bar.
- Under the display section, look for the Advance display settings and click on it.
- Click on Display Adapter Properties and select the monitor option which is located at the navigation bar.
- Select the refresh rate and save the changes.
10. Contact Customer Support
If you have tried various troubleshooting methods and the FreeSync brightness flickering issue persists, it may be necessary to contact customer support for further assistance.
- Go to the official website of the manufacturer and navigate to the support section.
- Select the contact information for customer support.
Contact Details
+91-80-67030050, Professional Graphics 24/7 support: 000-800-919-0272
Email: [email protected]
FAQs
1. Why Is My 144hz Monitor Flickering?
If your 144Hz monitor is flickering, it could be due to incompatible graphics drivers, faulty cables, or an incorrect refresh rate setting. Updating drivers, using certified cables, and adjusting the refresh rate settings may help resolve the issue.
2. What Are The Effects Of Flickering Screen?
A flickering screen can cause eye strain, headaches, and fatigue. It may also affect concentration and productivity. It can also reduce visual clarity, And affect concentration. And the main thing is it will impact the gaming experience
3. What Is The Minimum Refresh Rate To Avoid Flickering?
The minimum refresh rate suggested to prevent flickering is typically 60Hz. However, some individuals may be more sensitive and prefer a higher refresh rate, such as 75Hz or 120Hz, to minimise flickering and enhance visual comfort.
4. What Is Flicker Free Display?
The term “Flicker free display” refers to reducing the amount of flicker on your monitor. Flicker Free provides you with a more comfortable vision experience and reduces eye strain.
Conclusion
I hope now you can know what FreeSync brightness flickering and how it can be frustrating, but there are several solutions you can try to fix the issue.
There are different causes also for the flickering of the monitor, which you can check by checking the above article.
I hope this article will help you to understand the problem and their solutions.
